PROE PROJECTS Online Training in Hyderabad India
PROE PROJECTS Online Training in Hyderabad India : This is for the people who want to be in the top 10% of all the people who learn similar software. This will improve the job chances from 10% to 90% when you attend a job on this software.
PROE (Pro/Engineer) is a powerful 3D modeling software used by engineers and designers for product design and development. As with any software, it can take time and effort to master, but with the right training, anyone can learn to use it effectively. This is where PROE Projects Online Training in India can come in handy.
PROE Projects Online Training in Hyderabad India offers comprehensive training on how to use PROE software effectively, covering everything from the basics of 3D modeling to advanced techniques for complex product design. The training is conducted online, allowing participants to learn at their own pace and from the comfort of their own home or office.
The training is designed to be practical and hands-on, with participants working on real-world projects that simulate the challenges and complexities of product design. This not only helps participants to develop their skills and knowledge but also prepares them for the real-world challenges they are likely to face in their professional careers.
About Course
Pro/E or Creo or CATIA or UG or Solidworks is learnt by almost all Mechanical engineers. Out of 10 Jobs available in the Solid Modeling/ Product design areas, one receives over 500 applications. Of these 500 Engineers, about 60% will not be good in basics of ‘Engineering drawing and Machine drawing’ subjects. So, they get disqualified straight away as they don’t have 3D visualization skills and cannot draw even the missing views or sections views. Of, the remaining 40% engineers, 20% people will be relatively weak in Pro/Engineer software and will fail in the practical test. So, finally there are 10% people who are good both on the subject and also the software. Now, in the final 50 short listed engineers, there are only 10 jobs. This is where, doing this projects course will come to your rescue. When compared to a person who has done just the course, training along with so many modeling projects will give that cutting edge skills required to crack the interview. Its simple. What we say is “learning more than others” is the only way to get a Job.
PROE PROJECTS Course Content
Course Syllabus : 215 Lessons Course Duration : 20:46:36 Hrs
| Topic | No. of Lessons | Duration |
| AIR COCK ASSEMBLY PROJECT | 6 Lessons | 00:42:35 Hrs |
| 1. AIROFF COCK PROJECT PICS | 00:02:54 | |
| 2. AIRCOCK PART 1 to AIRCOCK PART 6 | ||
| BEARING ECCENTRIC ASSEMBLY PROJECT | 14 Lessons | 01:13:03 Hrs |
| 1. ECCENTRIC PROJECT PICS | 00:03:13 | |
| 2. ECCENTRIC PART 1A | 00:07:26 | |
| 3. ECCENTRIC PART 1B | 00:09:05 | |
| 4. ECCENTRIC PART 2A | 00:08:45 | |
| 5. ECCENTRIC PART 2B | 00:02:51 | |
| 6. ECCENTRIC PART 3 | 00:03:09 | |
| 7. ECCENTRIC PART 4 | 00:03:54 | |
| 8. ECCENTRIC PART 4A | 00:01:42 | |
| 9. ECCENTRIC PART 4B | 00:01:38 | |
| 10. ECCENTRIC PART 5A | 00:01:47 | |
| 11. ECCENTRIC PART 5B | 00:01:48 | |
| 12. ECCENTRIC PART 5C | 00:04:20 | |
| 13. ECCENTRIC PART 6 | 00:10:31 | |
| 14. BEARING ECCENTRIC ASSEMBLY | 00:12:54 | |
| BLOW OFF COCK ASSEMBLY PROJECT | 6 Lessons | 00:43:44 Hrs |
| 1. BLOW OFF COCK PROJECT PICS | 00:03:06 | |
| 2. BLOW OFF COCK PART 1 to BLOW OFF COCK PART 400:03:57 | ||
| 6. BLOW OFF COCK ASSEMBLY | 00:06:57 | |
| BUSHED PIN TYPE FLAGED COUPLING ASSEMBLY PROJECT | 8 Lessons | 00:43:18 Hrs |
| 1. BUSHED PIN TYPE PROJECT PICS | 00:03:17 | |
| 2. BPTFC PART 1 to BPTFC PART 6 | ||
| 8. BUSHED PIN FLANGED COUPLING ASSEMBLY | 00:11:52 | |
| C-CLAMP ASSEMBLY PROJECT | 9 Lessons | 00:49:47 Hrs |
| 1. C-CLAMP ASSEMBLY PROJECT PICS | 00:03:32 | |
| 2. C-CLAMP PART 1 to C-CLAMP PART 7 | ||
| 9. C-CLAMP ASSEMBLY | 00:10:08 | |
| CRANE HOOK ASSEMBLY PROJECT | 13 Lessons | 01:07:17 Hrs |
| 1. CRANE HOOK PROJECT PICS | 00:04:19 | |
| 2. CRANE HOOK PART 1 to CRANE HOOK PART 10 | ||
| 13. CRANE HOOK ASSEMBLY | 00:13:06 | |
| CROSS HEAD ASSEMBLY PROJECT | 9 Lessons | 00:48:45 Hrs |
| 1. CROSSHEAD PROJECT PICS | 00:03:26 | |
| 2. CROSSHEAD PART 1 to CROSSHEAD PART 7 | ||
| 9. CROSS HEAD ASSEMBLY | 00:08:04 | |
| FOOT STEP BEARING PROJECT | 7 Lessons | 00:48:19 Hrs |
| 1. FOOT STEP BEARING PROJECT PICS | 00:02:52 | |
| 2. FSB PART 1 to FSB PART 5 | ||
| 7. FOOT STEP BEARING ASSEMBLY | 00:07:13 | |
| FUEL INJECTOR PROJECT | 12 Lessons | 00:59:19 Hrs |
| 1. FUEL INJECTOR PROJECT PICS | 00:03:40 | |
| 2. FUEL INJECTOR PART 1 to FUEL INJECTOR PART 10 | ||
| 12. FUEL INJECTOR ASSEMBLY | 00:11:07 | |
| GATE VALVE ASSEMBLY PROJECT | 10 Lessons | 01:04:49 Hrs |
| 1. GATE VALVE PROJECT PICS | 00:02:49 | |
| 2. GATE VALVE PART 1 to GATE VALVE PART 8 | ||
| 10. GATE VALVE ASSEMBLY | 00:08:39 | |
| LATHE TAIL STOCK ASSEMBLY PROJECT | 14 Lessons | 01:08:22 Hrs |
| 1. LATHE TAIL STOCK PROJECT PICS | 00:02:52 | |
| 2. LATHE TS PART 1 to LATHE TS PART 10 | ||
| 14. LATHE TAIL STOCK ASSEMBLY | 00:13:37 | |
| MACHINE VICE ASSEMBLY PROJECT | 12 Lessons | 01:09:52 Hrs |
| 1. MACHINE VICE PROJECT PICS | 00:03:32 | |
| 2. MACHINE VICE PART 1 to MACHINE VICE PART 10 | ||
| 12. MACHINE VICE ASSEMBLY | 00:13:50 | |
| MILLING MACHINE TAIL STOCK ASSEMBLY PROJECT | 9 Lessons | 00:48:41 Hrs |
| 1. MILLING MACHINE TAIL STOCK PICS | 00:04:07 | |
| 2. MMTS PART 1 to MMTS PART 7 | ||
| 9. MILLING MACHINE TAIL STOCK ASSEMBLY | 00:09:46 | |
| OLD HAM COUPLING ASSEMBLY PROJECT | 6 Lessons | 00:29:14 Hrs |
| 1. OLD HAM COUPLING PROJECT PICS | 00:03:11 | |
| 2. OLD HAM PART 1 to OLD HAM PART 4 | ||
| 6. OLDHAM COUPLING ASSEMBLY | 00:08:16 | |
| PETROL ENGINE ASSEMBLY PROJECT | 6 Lessons | 00:31:03 Hrs |
| 1. PETROL ENGINE PISTON PROJECT PICS | 00:03:20 | |
| 2. PEP PART to PEP PART 4 | ||
| 6. PETROL ENGINE PISTON ASSEMBLY | 00:07:27 | |
| PLUMMER BLOCK PROJECT | 6 Lessons | 01:07:24 Hrs |
| 1. PLUMMER BLOCK PROJECT PICS | 00:02:55 | |
| 2. PLUMMER PART 1 to PLUMMER PART 5 | ||
| 6. PLUMMER BLOCK ASSEMBLY | 00:07:49 | |
| PROTECTED FLAGED COUPLING PROJECT | 9 Lessons | 00:50:57 Hrs |
| 1. PROTECTED FLANGED COUPLING PROJECT PICS | 00:03:20 | |
| 2. PFC PART 1 to PFC PART 6 | ||
| 9. PROTECTED FLANGED COUPLING ASSEMBLY | 00:12:06 | |
| RADIAL ENGINE SUB ASSEMBLY PROJECT | 12 Lessons | 01:10:09 Hrs |
| 1. RADIAL ENGINE PICS | 00:03:13 | |
| 2. RADIAL ESA PART 1 to RADIAL ESA PART 10 | ||
| 12. RADIAL ENGINE SUB ASSEMBLY | 00:16:45 | |
| REVOLVING CENTER ASSEMBLY PROJECT | 12 Lessons | 01:00:13 Hrs |
| 1. REVOLVING CENTER PROJECT PICS | 00:03:24 | |
| 2. REV CENTER PART 1A to REV CENTER PART 1C | ||
| 5. REV CENTER PART 2 to REV CENTER PART 8 | ||
| 12. REVOLVING CENTER ASSEMBLY | 00:09:52 | |
| SPIGOT AND SOCKET ASSEMBLY PROJECT | 5 Lessons | 00:24:51 Hrs |
| 1. COTTER JOINT PROJECT PICS | 00:03:22 | |
| 2. SS PART 1 to SS PART 3 | ||
| 5. SOCKET & SPIGOT JOINT ASSEMBLY | 00:04:27 | |
| SQUARE TOOL POST ASSEMBLY PROJECT | 14 Lessons | 01:09:13 Hrs |
| 1. SQUARE TOOL POST PROJECT PICS | 00:03:47 | |
| 2. SQ TOOL POST PART 1 to SQ TOOL POST PART 11 | ||
| 13. SQUARE TOOL POST ASSEMBLY 1 | 00:06:53 | |
| 14. SQUARE TOOL POST ASSEMBLY 2 | 00:08:33 | |
| STEAM ENGINE CROSS HEAD ASSEMBLY PROJECT | 7 Lessons | 00:47:37 Hrs |
| 1. STEAM ENGINE CROSS HEAD PROJECT PICS | 00:04:27 | |
| 2. SECH PART 1 to SECH PART 5 | ||
| 7. STEAM ENGINE CROSS HEAD ASSEMBLY | 00:08:54 | |
| STUFFING BOX ASSEMBLY PROJECT | 9 Lessons | 01:08:04 Hrs |
| 1. STUFFING BOX PROJECT PICS | 00:03:21 | |
| 2. STUFFING PART 1 to STUFFING PART 6 | ||
| 9. STUFFING BOX ASSEMBLY | 00:07:51 |
Click for more details :
PROE PROJECTS Online Training in India
Click for related courses :
UNIGRAPHICS Online Training in India
Our Other Courses :
| Duration | Course | Actual Fee | Discount Fee |
| 06:30:04 Hrs | SOLIDWORKS | ₹8000 | ₹3200 |
| 03:58:59 Hrs | PRIMAVERA | ₹12000 | ₹3600 |
| 02:11:46 Hrs | QUANTITY SURVEYING | ₹16000 | ₹8000 |
| 11:31:42 Hrs | CATIA | ₹8000 | ₹3200 |
| 23:06:03 Hrs | CREO | ₹8000 | ₹3200 |
| 02:12:22 Hrs | HYPERMESH | ₹5000 | ₹2500 |
| 03:13:08 Hrs | ANSYS WORKBENCH | ₹6000 | ₹3000 |
| 23:38:59 Hrs | AUTOCAD(2D&3D) | ₹5000 | ₹1000 |
| 04:02:45 Hrs | FOUR REALTIME PROJECTS USING STAAD STRUCTURAL SOFTWARE | ₹4000 | ₹2000 |
| 03:52:36 Hrs | FOUR REALTIME PROJECTS USING ETABS STRUCTURAL SOFTWARE | ₹4000 | ₹2000 |
| 11:40:26 Hrs | STAAD PRO LEVEL 1 | ₹5000 | ₹2500 |
| 07:12:29 Hrs | STAAD PRO LEVEL 2 | ₹5000 | ₹2500 |
| 00:00:00 Hrs | SAP & SAFE | ₹10000 | ₹3000 |
| 11:39:30 Hrs | ETABS STRUCTURAL | ₹10000 | ₹3000 |
| 16:33:19 Hrs | UNIGRAPHICS | ₹8000 | ₹3200 |
| 09:58:50 Hrs | CATIA PROJECTS | ₹6000 | ₹3000 |
| 03:58:01 Hrs | CREO PROJECTS | ₹6000 | ₹3000 |
| 08:43:47 Hrs | UNIGRAPHICS PROJECTS | ₹1800 | ₹900 |
| 04:23:46 Hrs | 3DS MAX 2011 | ₹5000 | ₹2000 |
| 20:46:36 Hrs | PROE PROJECTS | ₹4800 | ₹2400 |
| 06:44:22 Hrs | 3DS MAX 2014 | ₹5000 | ₹2500 |
For more details on Cad Courses :
Visit : www.eccindia.org
Call : +91 9703331068